Thunder Tiger Mini Titan E325

Online Catalogue | Helicopter Upgrades |  Thunder Tiger Mini Titan E325

TTE-11: CNC SPINDLE SHAFT - MINI TITAN 325 CNC feathering spindle for Thunder Tiger Mini Titan E325 helicopter 4mm dia x 56mm 3 pcs per pack Price (before discount): £1.89 People who bought this item also bought: 1. HR1055: RHINO GEAR ULTRA HARDENED STEEL PINION - 0.5M 13T - TREX450/3DX450 2. CUK-T-4NUT: 4 PIECE NUT DRIVER SET 3. R1025: HEX DRIVER SET

TTE-33: CNC BOOM CLAMP - MINI TITAN 325 CNC boom clamp for Thunder Tiger Mini Titan E325 helicopter Price (before discount): £2.99

MH-TI018FGS: FRONT SHAFT. GEAR AND PULLEY SET - MINI TITAN E325 The front shaft, gear and pulley set for Thunder Tiger Mini Titan E325 helicopter is designed to achieve TRUE operation for the front gear drive assembly Features: Stronger CNC steel shaft for less susceptable to bending. Pre-assembly 2 of 3x8x4 precision bearings to ensure super smoothness operation. No more glueing the bearings on front shaft! CNC machined delrin blue gear with guaranteed roundness and zero wobbling! CNC machined aluminum front pulley to eliminate stripping problem of stock plastic front pulley. Price (before discount): £18.99

MH-TI024SEB: TAIL SERVO MOUNT FOR S9650-BLUE - MINI TITAN E325 The Tail Rudder Servo Mount is designed specifically for the most popular Futaba Digital Servo S9650. It is designed very light weight and strong to mount the Tail Rudder Servo securely onto the tail boom. It also allows mechanical adjustment of the servo position to achieve maximum tail control performance without exceeding servo travel limit. It is designed to improve tail control performance on THUNDER TIGER MINI TITAN E325 helicopters. • One special feature of this tail servo mount is that there are 4 special CNC aluminum spacers to replace stock plastic dampers. With the rigid and precision aluminum spacers, there is zero delay in reaction due to the flex in plastic dampers. • Blue anodised finish Price (before discount): £9.49 OUT OF STOCK People who bought this item also bought: 1. MH-TI026: PRECISION CNC TAIL PITCH LEVER-SILVER - MINI TITAN E325 2. MH-TI120: 120CCPM DELUXE SWASHPLATE-SILVER - MINI TITAN E325

MH-TI026: PRECISION CNC TAIL PITCH LEVER-SILVER - MINI TITAN E325 The precision aluminum dual arm bell crank is designed to replace stock plastic bell crank on Thunder Tiger Mini Titan E325 helicopters. The new design combines the strength of the aircraft aluminum material and high quality ABEC-5 bearings which are placed at every posible junction of this complex bell crank. The design aims to improve achieve highest precision in tail response at utmost smoothness and zero play performance. It is also stylish, strong and light. Includes: • 1 x CNC Aluminum Tail pitch lever (bell crank) • 1 x CNC aluminum ball • 6 x Precision miniature bearings • All hardware included • Silver anodised finish Price (before discount): £20.99 OUT OF STOCK People who bought this item also bought: 1. MH-TI024SEB: TAIL SERVO MOUNT FOR S9650-BLUE - MINI TITAN E325 2. MH-TI120: 120CCPM DELUXE SWASHPLATE-SILVER - MINI TITAN E325

MH-TI026B: PRECISION CNC TAIL PITCH LEVER-BLUE - MINI TITAN E325 The precision aluminum dual arm bell crank is designed to replace stock plastic bell crank on Thunder Tiger Mini Titan E325 helicopters. The new design combines the strength of the aircraft aluminum material and high quality ABEC-5 bearings which are placed at every posible junction of this complex bell crank. The design aims to improve achieve highest precision in tail response at utmost smoothness and zero play performance. It is also stylish, strong and light. Includes: • 1 x CNC Aluminum Tail pitch lever (bell crank) • 1 x CNC aluminum ball • 6 x Precision miniature bearings • All hardware included • Blue anodised finish Price (before discount): £20.99

MH-TI049: ALUMINIUM TAIL BOOM SUPPORT- MINI TITAN E325 The aluminum tail support ends offer much more rigidity than the stock plastic support ends. The support ends will be bolted securely on the heli and eliminates all the unnecessary flexes. Together with high quality carbon fibre rods, the system brings best gyro function and best 3D performance for the THUNDER TIGER MINI TITAN E325 helicopters. Price (before discount): £11.99

MH-TI064VFR: CARBON FIBRE VERTICAL FIN ROUND END - MINI TITAN E325 The Vertical Fin Round End is machined from Carbon Fibre material, very light and strong. It is designed protect Tail Rotor and Tail Case during hard landing. And yet, the Vertical Fin Round End is also made with 1.50mm thickness Carbon Fibre sheet to minimize Tail Fin vibration and maximize Gyro performance under high RPM of tail rotor condition. It is designed to replaced very weak stock plastic vertical fin set Price (before discount): £7.99

MH-TI072: PRECISION FLYBAR CONTROL SYSTEM - MINI TITAN E325 The precision flybar control system provides super smooth controls on the Thunder Tiger Mini Titan E325 helicopters. With double precision bearings on each upper mixing arm, the unit provides best accuracy for cyclic controls, extremely smooth and slop free. Closed loop flybar unit is designed to ensure the linkage balls always inline and avoid flybar stripping. The new flybar system is very accurate and precision but also very light to reduce weight on the head of the Mini Titan. This is a drop in replacement for stock plastic flybar system. Price (before discount): £24.99

MH-TI142B: PRECISION TAIL ROTOR-BLUE - MINI TITAN E325 The High Precision Tail Rotor is desgined to be used on the Thunder Tiger Mini Titan E325 helicopter. It is manufactured within tolerance of +/-0.002mm to improve tail control performance. Includes: • Precision Tail Rotor SE • Steel Tail Rotor Hub. • Four precision bearings preinstalled • Four CNC aluminum blade grip holder washers • Two CNC brass washers • Hardware included Weight: 5.5 grams Price (before discount): £19.99

MH-TI120: 120CCPM DELUXE SWASHPLATE-SILVER - MINI TITAN E325 The NEW 120 degree CCPM Swashplate version is designed for use only on Thunder Tiger Mini Titan E325 helicopters It's stylish and super light weight aircraft-aluminum swashplate is designed to bring best cyclic control and performance to your helicopter in flights. • Central ball has been changed with more advanced material to reduce wear out problem. • Better swashplate bearings to reduce slops. • Silver anodised color Includes: • 120 CCPM swashplate • All hardwares Weight: 12.8 grams Price (before discount): £21.99 OUT OF STOCK People who bought this item also bought: 1. MH-TI026: PRECISION CNC TAIL PITCH LEVER-SILVER - MINI TITAN E325 2. MH-TI024SEB: TAIL SERVO MOUNT FOR S9650-BLUE - MINI TITAN E325

MH-TI183: PRECISION CNC ALUMINIUM WASHOUT SET-SILVER - MINI TITAN E325 The new precision CNC aluminum washout set offers many improved features to minimize all slop in main shaft area and also in the linkage arms. The new washout set contains double bearings on each mixing arm to ensure there is absolutely zero slop and super smooth operation. These smallest bearings available on the market offer smooth operation while reducing weight to minimum and also offers stylish look. • The washout base is produced at extreme tolerance of +/- 0.001mm to ensure super fit and zero slop in the main shaft. The new washout base is also designed with "self-lubricate" feature to keep lubrication in the washout base for even more smooth and prolong life of the washout base. Moreover, an additional mounting hole on each cyclic lever allows users to gain 15% or more on cyclic response. It is also designed to lower the top of washout base to maximize washout pitch and cyclic travel. Includes: • 1 CNC Washout base • 1 CNC Brass Sleeve with self-lubrication feature • 2 CNC cyclic lever arms • 4 precision miniature bearings • 2 x washers 1.7x2.6x2 • 2 x washers 2x3.7x0.2 • All hardwares Price (before discount): £15.99

MH-TI193: PRECISION CNC TAIL PITCH SLIDER SE-SILVER - MINI TITAN E325 The newl designed Tail Pitch Slider SE will provide much improvement for the tail control on the Thunder Tiger Mini Titan E325 helicopter. With the new designed ball linkage system instead of pin system, the tail pitch slider SE will reduce most the slop in the tail while providing best accurate control for the Mini Titan E325 tail system. With double ball bearings at tail pitch slider hub, the unit is so smooth and absolutely has zero slop. All tail pitch slider arms are made of cnc aluminum for best accuracy. It is also very light in weight and strong. With complete precision bearings built in the unit gives best precision tail controls and smoothness. The Tail Pitch Slider SE is designed to improve tail controls performance on Thunder Tiger Mini Titan E325 helicopters. • Compatible with stock Thunder Tiger Mini Titan E325 parts. Includes: • 4 CNC aluminum parts • 2 brass pins • 2 ball bearings • 1 CNC brass collar • All hardwares Price (before discount): £15.99

Online Catalogue | Helicopter Upgrades |  Thunder Tiger Mini Titan E325